Friday, February 26, 2010

Long Rod Composite Insulator Series





Model NO.: FXBW Series
Standard: IEC






Product Description
Long Rod Composite Insulators are mainly used in high voltage overhead power transmission & distribution lines for insulation and mechanical connection.



Normal Operation Conditions:
1 Ambient temperature: -50C-+50C
2 Altitude: not more than 3000m
3 Frequency: not more than 100H

Wednesday, February 17, 2010

Residential Vacancy Sensors - RW500BLACC4


OVERVIEW

WALL VAC SENSOR 2-WIRE 500W LA
FEATURES
California Title 24 compliant. Replaces a standard light or fan single pole switch. Lighted switch for visibility in darkened rooms. Manual-ON operation. Fixed 30-minute time delay, no adjustment necessary. Low-profile styling with uniform color-matched lens and device. Coverage: 180 degrees, max. 600 ft.2 (56m2). cULus listed. 5-year warranty. RW500B only -- Incandescent. RWU600B only -- Load: Incandescent, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.

SPECIFICATION
Dimension Info
Width: 0
Height: 0
Depth: 0
Volume: 0
Weight: 0
BUY AMERICAN ACT COMPLIANCE
Country of Origin: CHINA
Buy American Act Status: No

Power Commander Plus High Density PDU - PCP


OVERVIEW
Power Commander® Power Distribution Units from Wiremold/Legrand offer comprehensive power distribution solutions for IT environments from networking solutions to high density servers. Power Commander® IQ Power Distribution Units offer remote current and temperature monitoring of connected equipment and individual outlet control for power recycling. Management of power up/down sequencing of equipment can all be done remotely. Our power distribution unit alarms warn IT personnel of potential power or environment problems before they become critical. Power Commander® and Power Commander® Plus High Current Power Distribution Units provide an elegant solution where reliable high-density power distribution for IT equipment racks, cabinets, and enclosures is required.


FEATURES
  • 50 Amp or 60 Amp Power Distribution. High current 120V and 120/208V units allow you to safely support power-hungry IT equipment.
  • 3-circuit design. Each unit has 3 circuit breakers for overload protection. 50 Amp units have a 3-wire, 50A, 1-phase plug (1 Hot, 1 Neutral, 1 Ground) that branches into one (1) 20 Amp circuit and two (2) 15 Amp circuits, giving you 50 Amps total. 60 Amp units have a 5-wire, 30A, 3-phase plug (3 Hots, 1 Neutral, 1 Ground) that is connected to three (3) 20 Amps circuits, giving you 60 Amps total.
  • UL489 Circuit Breakers. All models use UL489 Listed circuit breakers that are more reliable than simple thermal protectors.
  • 50A single phase design. 50A models will power each rack from only one phase which can simplify power monitoring for the data center.
  • IEC Receptacles. Models with IEC receptacles use both C13 and C19 receptacles for each circuit, offering maximum flexibility for powering IT equipment.
  • Easy swivel mounting. Allows no-hassle one-handed mounting of the PDU, reducing installation time.
  • Choice of output receptacles. Either NEMA or IEC output receptacles to match your existing power cabling.
  • Blue LED Power Indication for each circuit. Provides confirmation at a glance that the circuit is powered.
  • Choice of colors for top enclosure. Each model is available with either a black cover or white cover, allowing the user to easily identify primary and secondary power in redundant power schemes.
  • cTUVus Listed. Meets UL60950-1 Safety Standards.

SWITCHING DEVICE


FEATURES

  • Ergonomic design and solid, quality feel combine for smooth, easy operation and precise control.
  • Electromagnetic and radio-frequency interference protection built in.
  • Sleek, sculpted contemporary design. No dirt-catching crevices.
  • Tough, impact-resistant thermoplastic housing makes it a perfect choice for new home construction. Matching, unbreakable Trade Master wall plate available for all models.
  • Preset ON/OFF switch automatically returns controlled lights to preset level without readjusting dimmer setting.
  • Exclusive, screw-pressure-plate back wire terminals save time, space and money. Designed for 12 and 14 gauge wire, stranded or solid. No-wire-lead design eliminates wire nuts.
  • Superior heat management.
  • No derating on 600W units.
  • Patented Snap-In Light Module (sold separately) transforms the dimmer into an illuminated dimme
SPECIFICATION
Dimension Info
Width: 0
Height: 0
Depth: 0
Volume: 0
Weight: 0
BUY AMERICAN ACT COMPLIANCE
Country of Origin: CHINA
Buy American Act Status: No

Sunday, February 7, 2010

USB Pole Displays


IEE’s latest technological innovation is the 2x20, 9mm VF pole display powered directly from any 1.1 or 2.0 USB port. This is NOT a USB PlusPower device. It is powered directly from the USB port on any PC or laptop. This display saves space and simplifies installation by eliminating the individual power supply brick. VF models with a USB interface are also available with a power supply brick.

IEE’s 64x240 graphic mode LCD displays are available in two options. One model incorporates a “y” cable to accommodate a USB I/O connector and a brick power supply. The other model incorporates a USB PlusPower connector.

Available Configurations:

PDK-460U

USB – Blue/White monochrome 64x240 Graphic LCD, plastic type-4 housing, USB PlusPower

PDK-4U03

USB - 2x20 VFD, 9mm, USB, plastic type-4 housing

PDK-4U05

USB - 2x20 VFD, 5mm, USB, plastic type-4 housing

PDK-4UP3

USB - 2x20 VFD, 9mm, IEE Protocol, USB POWERED No-Brick Reqd, plastic type-4 housing

PDK-4UP5

USB - 2x20 VFD, 5mm, IEE Protocol, USB POWERED No-Brick Reqd, plastic type-4 housing

PDK-UP03

USB - 2x20 VFD, 9mm, IEE Protocol, USB POWERED No-Brick Reqd, extruded aluminum housing

PDK-8U03

USB - Double-sided, 2x20 VFD, 9mm, IEE Protocol, USB PlusPower, compact molded plastic housing

PDK-UP05

USB - 2x20 VFD, 5mm, IEE Protocol, USB POWERED No-Brick Reqd, extruded aluminum housing

PDK–USB2

USB - 2x20 VFD, 11mm, extruded aluminum housing

PDK-USB3

USB - 2x20 VFD, 9mm, extruded aluminum housing

PDK-USB5

USB - 2x20 VFD, 5mm, extruded aluminum housing

TFT Display Enhancement


Complete integrated solutions are available which can include virtually any combination of flat panel display, interface controller, touch screen, backlight, inverter, power supply and mechanical packaging for rugged or military applications.

IEE Advantages

  • Rapid Response to Customer Requests
  • Competitively Priced Solutions
  • In-House, Full Service Engineering
  • One Year Warranty
  • Harsh Environment Specialists
  • Design to Customer Specifications
  • ISO 9001:2000 Certified
  • Short Run + High Volume Production Capability
  • Quality System Qualification compliant with MIL-I-45208
  • Workmanship Standards: IPC A610 and ANSI-J-Standard 001
  • Harsh Environment Specialists

Display Integration Capabilities

Brightness Enhancement:

  • Multi-Lamp Inverter
  • Direct Backlighting
  • Polarizer Upgrade
  • Optical Film Enhancement (passive)
  • Brightness up to 3000 NIT
  • LED Backlighting (replace existing CCFL)
  • NVIS compatibility

Filters:

  • Anti-glare
  • Anti-Reflective
  • Vandal Resistant Protection
  • EMI
  • Contrast Enhancement

Touch Screen Integration:

  • Resistive (Digital & Analog)
  • Capacitive
  • Projected capacitive
  • NFI
  • IR

Display Controllers:

  • Analog RGB
  • Video
  • USB

Ruggedization:

  • Extended Operating Temperature
  • Vibration and Shock
  • Moisture and dust
  • Altitude
  • Replace CCFL with LED

Mounting Bezels & Housing:

  • Metal (machined or cast)
  • Plastic
  • Open frame or complete enclosures
  • Custom enclosures to NEMA requirements available
  • Agency Certifications

Vacuum Fluorescent


The unbeatable combination of outstanding appearance, ease of use, and a wide range of formats has made IEE’s VF displays the top choice in a variety of applications such as industrial, medical and test equipment.

Display fields range from 16 to 240 bright, easy to read characters. The display color is blue-green which may be filtered to several alternative colors. IEE's VF product family includes low cost and full feature dot matrix displays that are industrial strength and ruggedized. Most are available with extended operating temperatures and an array of enhanced features such as expanded character sets and downloadable fonts.

Features and Benefits
  • RoHs Compliant
  • On-Board serial & parallel interface
  • Models with interface to Intel or Motorola host processors
  • Common software Interface and connector interfaces
  • Parallel 8-bit or EIA-232C serial data input at baud rates up to 19.2Kb
  • Low 5Vdc power
  • 100% surface mount technology
  • Standard temperature range –20° to +70°C, extended range available –40° to + 85°C
  • Hardware and software self-test modes
  • Brightness & blinking field control
  • 5 character sets
    • 96 ASCII Characters; 51 Scientific and Special Characters
    • European, Katakana, Cyrillic, Hebrew
  • 10 user defined downloadable characters

Available Configurations

Below is a list of IEE’s most popular selling modules in the Century and No-Frills product lines. All Century 036X3 are RoHs compliant. Wide temperature range and conformal coating options are available as well as other module sizes and features, please contact factory.

Model

Character Format

Display Format

Character Height

Length

Width

Depth

Max. Current

Century Series

036X3-100-05420

5x7 DM

4x20

5 mm

5.00"

2.78"

0.92"

890mA

036X3-105-05220

5x7 DM

2x20

5 mm

5.00"

2.25"

0.88"

510mA

036X3-122-09220

5x7 DM

2x20

9 mm

7.75"

2.58"

1.00"

675mA

036X3-124-09420

5x7 DM

4x20

9 mm

7.75"

3.40"

1.00"

1300mA

036X3-151-05240

5x7 DM*

2x40

5 mm

9.50"

2.05"

1.00"

800mA

Low-Cost, “No-Frills” Series

03601-90-080R

5x7 DM

4x20

5 mm

5.51"

2.44"

1.21"

450mA

03601-91A-40R

5x7 DM

2x20

5 mm

6.93"

1.73"

1.00"

570mA

03601-92-020R

5x7 DM

1x20

5 mm

5.90"

1.50"

0.80"

410mA

03601-95B-040

5x7 DM

2x20

5 mm

5.00"

2.25"

0.94"

460mA

03601-96-080R

5x7 DM

2x24

5 mm

7.85"

2.03"

0.94"

750mA*Underbar; DM=dot matri