INVERTERs

power Range (ACT400)
0.55 - 18.5 kW 3-Phase 360 - 480V / 50 - 60 Hz (± 10%)

Power Range (ACT200)
0.55 - 3 kW 1 and 3-Phase 200 - 240V / 50 - 60 Hz (± 10%)

Type of Control
Selectable Vector control function:
sensor-less control, sensor-less field oriented control,
field oriented control with encoder

Overload Capacity
150% for 60s / 200% for 1s

Type	Power kW*
ACT400 - 001	0,4/0,55
ACT400 - 002	0,55/0,75
ACT400 - 003	0,75/1,1
ACT400 - 004	1,1/1,5
ACT400 - 005	1,5/2,2
ACT400 - 007	2,2/3,0
ACT400 - 010	3,0/4,0
ACT400 - 014	4,0/5,5
ACT400 - 018	5,5/7,5
ACT400 - 025	7,5/11
ACT400 - 034	11/15
ACT400 - 040	15/18,5
ACT200 - 003	0,4/0,55
ACT200 - 004	0,55/0,75
ACT200 - 005	0,75/1,1
ACT200 - 007	1,1/1,5
ACT200 - 009	1,5/2,2
ACT200 - 012	2,2/3,0
*200% overload - 1sec 150% overload - 1sec

Switching Frequency
2, 4, 8, 12, 16 kHz

Enclosure
IP20 (EN 60529)

EMC Filter
Integrated up to 7.5 kW (EN 61800-3)

Main Standard Hardware features
Integrated dynamic braking module
DC link connection
Standard encoder interface
Motor temperature monitoring
Plug-in power terminals (up to 3kW)
Plug-in and programmable control terminals
1 relay output (changeover contact)
6 digital input, 1 multifunction input
1 digital Output, 1 multifunction Output

Optional Expansion Modules
Expansion of analog, digital input and output
System bus

Optional Communication Modules
RS232, RS485, Profibus-DP, CANopen, LON

Optional Keypad
Removable keypad KP500 with copy function

Optional PC Software
VPlus for Windows operating system

Main Software Features
Dynamic braking
Programmable start and stop characteristics
Motor potentiometer
Programmable S curve
4 data sets
Auto start-up and commissioning,
Auto reset after failure, Auto start after power failure
PI controller
Mechanical brake control free of friction
Programmable logic and timer functions
Volume flow control
Bumpless torque / speed changeover
Master/slave function with electronic gear function
Enhanced positiong function
Index and stability control
Comprehensive monitoring and protection capabilities

Single Reach and Double Reach Trucks

Toyota 8-series Electric Reach Trucks revolutionize the way materials are handled when cube utilization is at a premium. From the versatility of the latest electronic control technology to the comfort and convenience of an ergonomically designed operator compartment, Toyota’s 8-series single reach and double reach trucks represent a dramatic approach to reach truck performance and quality.

Operability/Performance

• AC Powered System delivers precise speed and torque control loaded or unloaded.
• AC Hydraulic Control System provides fully variable lift/lower control for fast, efficient and smooth operation.
• Multifunction Control Handle allows single-handed control of travel, lift/lower, tilt, reach/retract (including high speed), horn and optional sideshifter for simplified operation.
• Electronic Power Steering provides quiet, effortless and responsive operation for precise maneuverability.
  

Reliability/Durability

• Rugged Single or Double Reach Pantograph with high speed reach and retract increase reliability and performance
• Dual Articulating Polyurethane Load Wheels offer excellent durability, especially on uneven surfaces, for improved performance.
• Unitized Frame Design provides optimum rigidity and strength on all 8-Series Reach Trucks.
• Regenerative Braking improves overall efficiency and prolongs brake component life.

Ergonomics

• ERGOMAT^® Padding absorbs vibration to reduce foot and ankle fatigue.
• Spacious Operator Compartment with 11" low step height eases frequent entry and exit during the work shift for reduced body fatigue.
• Cushioned Backrest, Armrest and Floor Mat are designed to limit fatigue and keep operators productive.
• Polyurethane Drive Tire absorbs shocks caused by uneven floors to allow for smooth traveling.

Ease of Service

• Self-Diagnostics help maximize lift truck uptime by checking critical functions at start up.
• Built-In Analyzer provides easy troubleshooting and eliminates the need for an external hand-held analyzer.
• One-Piece Top Cover with interlocking door provides access to major components to reduce service time for inspection and maintenance.
• Bolt-On Toe Boxes allow for easy wheel replacement without taking the truck out of service for extended periods of time.
• Lift-Out Battery Gate and rollers facilitate fast removal and service.

Specification Chart

Model	Load Capacity* (lbs.)	Voltage (V)	Baselegs Opening I.D. (in.)	Battery Compartment Width (in.)	Maximum Fork Height (in.)	Maximum Travel Speed Full Load/No Load (m.p.h.)	Maximum Lift Speed Full Load/No Load (f.p.m.)	Maximum Lower Speed Full Load/No Load (f.p.m.)
8BRU18 Single Reach	3500	24	32 to 50	14.4 or 16.4	FSV to 270	6.0/6.0	40/60	80/80
8BRU18 Single Reach	3500	36	32 to 50	14.4 or 16.4	FSV to 270	7.0/7.0	70/85	80/80
8BRU23 Single Reach	4500	36	32 to 50	16.4 or 20.9	FSV to 366	7.3/7.3	65/100	95/90
8BDRU15 Double Reach	3000	36	32 to 50	16.4 or 20.9	FSV to 366	7.3/7.3	65/100	95/90

HDP series Parallel shaft gear units

The new benchmark in the parallel shaft category

Torque ratings consistently high, gear ratios in close progression, numerous mounting options along with compact dimensions will ease the engineering of any application.The rigid monobloc housing and the gears' high class of precision produce an extremely quiet and vibration-free operation Transmissible Torque
4650 M_N2 75000 Nm

Gear Ratios
7,1 i_N 500 with progression = 1,12

Mounting
Foot, flange, shaft mounting

Input
solid shaft, direct motor mounting, lantern housing with flexible coupling

Output shaft
solid, (single and double extension), keyed hollow,shrink disc

Options
Fan cooling, cooling coil, heaters
Indipendent cooling system
Backstop
Non-contacting seals
Forced lubrication

Type	Torque Nm
HDP 60	4650
HDP 70	6350
HDP 80	11500
HDP 90	16550
HDP 100	24000
HDP 110	28700
HDP 120	35300
HDP 130	59300
HDP 140	75000

Temperature and vibration sensors
Drywell

MB - Horizontal centrifugal pumps

IM - Vertical centrifugal pumps
in Polypropylene and PVDF

The vertical centrifugal pumps made in resin are high efficiency pumps for fixed installations with the pump immersed directly in a tank, operated by an electric motor in direct drive (max. 3000 rpm) for rapid emptying of fluid, with a flow rate of from 16 to 55 m3/hour. The particular form of construction of this pump, in addition to not using internal mechanical seals (subject to high wear), guarantees that any accidental leakage of the fluid is collected in the tank. The open rotor allows very dirty fluids, with an apparent viscosity of up to 500 cps (at 20°C) and small sized suspended solids, to be pumped with a continuous flow. The choice of the pump's composition materials allows you to determine the best chemical compatibility with the fluid and/or the environment without forgetting the correct temperature field.

Description
The vertical centrifugal pumps in resin are made up of a sturdy body and a column fixed to the bracket plate, above which is fixed the lantern that is the fixing element for the electric motor. The motor is direct drive mounted onto the pump's shaft using an elastic joint, supported by a radial bearing. The open rotor is fixed at the opposite end of the shaft. The construction of this pump allows the motor to be disassembled without having to remove the pump from the system.

How the pump works
The rotor, integral with the shaft and the electric motor, mounted in direct drive, is rotated at a pre-set speed creating, due to a centrifugal effect, intake on the central duct and delivery on the peripheral duct..
Executions in: Polypropylene, PVDF;
pump immersed in tank
motor can be disassembled with the pump installed;
no welds;
can also be used with very dirty fluids;
high flow rates: from 15 to 55 m3/hour;
motor replacement without removing the pump;
simple replacement of wearable bushings;
extreme ease of maintenance;
can be disassembled completely;
can be supplied without a motor.

Installation
The vertical centrifugal pumps must only be installed with the axis positioned vertically and the pump immersed in the tank. Suitable devices must be used to avoid dry operation, the formation of vortexes and the possible intake of air. The vertical centrifugal pumps must only operate when the PUMP IS FLOODED; operation when dry or with air bubbles can cause damage to the internal bushing.

STEEL TABLETOP CHAINS

FEATURES
- Surface finish
When products are sliding on a chain, the bottom will affect the surface finish of the chain. Rexnord tests have shown that during the first days after installation the initial surface finish is changing to a lower level that is maintained during the normal life of the chain.
Surface finish is a valuable feature, although it is not the determining factor between good and great performance.

- Sliding properties
These depend on the base material and the treatments during the manufacturing process. To ensure superior sliding properties, Rexnor uses a number of patented chain materials, specifically designed for slatband chain applications. You can find more details on these materials on next page.

During the entire production process the flatness is measured in running direction (R) and in width direction (W)
The flatness in width direction is important when products slide sideways from one chain to the other. For this reason the cross sections of all Rexnord and MCC chains are convex instead of concave, to prevent products to fall. Due to the careful control in production, these chains offer superior lateral flatness values, which can be found in the tables on the page of each chain.

Flatness when a product moves from one link of the chain to the next is also important, as poor flatness will cause products tipping, leading to production loss in the line. MCC and Rexnord steel slatband chains offer an outstanding flatness in running direction

Working load
At which load a chain is actually breaking is not relevant to determine if a certain chain is suitable for your application. More important is the maximum working load a chain can handle before permanent deformation occurs. Rexnords chain calculation program will assist in defining the right chain for specified applications, considering conveyor length, chain speed, accumulation level, lubrication, product type and weight.

- Ground finish
Certain customers prefer steel slatband with ground finish for its sliding properties. The specification table on the product page of each chain indicates whether a chain surface finish is ground or non-ground.

- Polished hinge eyes
The performance of the chain on high-speed side-transfers, such as pressure-less combiners improves with polished hinge eyes, due to the smooth contact with the wearstrips. This prevents pulsating of the chain and improves product handling. Most Rexnor` sideflexing chains have polished hinge eyes, because these are always in contact with the curve.
The specification table of each chain indicates whether a chain has polished hinge eyes.

Long Rod Composite Insulator Series

Model NO.:	FXBW Series
Standard:	IEC

Product Description Long Rod Composite Insulators are mainly used in high voltage overhead power transmission & distribution lines for insulation and mechanical connection.



Normal Operation Conditions:
1 Ambient temperature: -50C-+50C
2 Altitude: not more than 3000m
3 Frequency: not more than 100H

Residential Vacancy Sensors - RW500BLACC4

OVERVIEW

WALL VAC SENSOR 2-WIRE 500W LA
FEATURES
California Title 24 compliant. Replaces a standard light or fan single pole switch. Lighted switch for visibility in darkened rooms. Manual-ON operation. Fixed 30-minute time delay, no adjustment necessary. Low-profile styling with uniform color-matched lens and device. Coverage: 180 degrees, max. 600 ft.2 (56m2). cULus listed. 5-year warranty. RW500B only -- Incandescent. RWU600B only -- Load: Incandescent, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.

SPECIFICATION

Dimension Info

Width: 0

Height: 0

Depth: 0

Volume: 0

Weight: 0

BUY AMERICAN ACT COMPLIANCE

Country of Origin: CHINA

Buy American Act Status: No

Power Commander Plus High Density PDU - PCP

OVERVIEW
Power Commander® Power Distribution Units from Wiremold/Legrand offer comprehensive power distribution solutions for IT environments from networking solutions to high density servers. Power Commander® IQ Power Distribution Units offer remote current and temperature monitoring of connected equipment and individual outlet control for power recycling. Management of power up/down sequencing of equipment can all be done remotely. Our power distribution unit alarms warn IT personnel of potential power or environment problems before they become critical. Power Commander® and Power Commander® Plus High Current Power Distribution Units provide an elegant solution where reliable high-density power distribution for IT equipment racks, cabinets, and enclosures is required.


FEATURES

• 50 Amp or 60 Amp Power Distribution. High current 120V and 120/208V units allow you to safely support power-hungry IT equipment.
• 3-circuit design. Each unit has 3 circuit breakers for overload protection. 50 Amp units have a 3-wire, 50A, 1-phase plug (1 Hot, 1 Neutral, 1 Ground) that branches into one (1) 20 Amp circuit and two (2) 15 Amp circuits, giving you 50 Amps total. 60 Amp units have a 5-wire, 30A, 3-phase plug (3 Hots, 1 Neutral, 1 Ground) that is connected to three (3) 20 Amps circuits, giving you 60 Amps total.
• UL489 Circuit Breakers. All models use UL489 Listed circuit breakers that are more reliable than simple thermal protectors.
• 50A single phase design. 50A models will power each rack from only one phase which can simplify power monitoring for the data center.
• IEC Receptacles. Models with IEC receptacles use both C13 and C19 receptacles for each circuit, offering maximum flexibility for powering IT equipment.
• Easy swivel mounting. Allows no-hassle one-handed mounting of the PDU, reducing installation time.
• Choice of output receptacles. Either NEMA or IEC output receptacles to match your existing power cabling.
• Blue LED Power Indication for each circuit. Provides confirmation at a glance that the circuit is powered.
• Choice of colors for top enclosure. Each model is available with either a black cover or white cover, allowing the user to easily identify primary and secondary power in redundant power schemes.
• cTUVus Listed. Meets UL60950-1 Safety Standards.

SWITCHING DEVICE

FEATURES

• Ergonomic design and solid, quality feel combine for smooth, easy operation and precise control.
• Electromagnetic and radio-frequency interference protection built in.
• Sleek, sculpted contemporary design. No dirt-catching crevices.
• Tough, impact-resistant thermoplastic housing makes it a perfect choice for new home construction. Matching, unbreakable Trade Master wall plate available for all models.
• Preset ON/OFF switch automatically returns controlled lights to preset level without readjusting dimmer setting.
• Exclusive, screw-pressure-plate back wire terminals save time, space and money. Designed for 12 and 14 gauge wire, stranded or solid. No-wire-lead design eliminates wire nuts.
• Superior heat management.
• No derating on 600W units.
• Patented Snap-In Light Module (sold separately) transforms the dimmer into an illuminated dimme

SPECIFICATION

Dimension Info

Width: 0

Height: 0

Depth: 0

Volume: 0

Weight: 0

BUY AMERICAN ACT COMPLIANCE

Country of Origin: CHINA

Buy American Act Status: No

USB Pole Displays

IEE’s latest technological innovation is the 2x20, 9mm VF pole display powered directly from any 1.1 or 2.0 USB port. This is NOT a USB PlusPower device. It is powered directly from the USB port on any PC or laptop. This display saves space and simplifies installation by eliminating the individual power supply brick. VF models with a USB interface are also available with a power supply brick.

IEE’s 64x240 graphic mode LCD displays are available in two options. One model incorporates a “y” cable to accommodate a USB I/O connector and a brick power supply. The other model incorporates a USB PlusPower connector.

Available Configurations:

PDK-460U	USB – Blue/White monochrome 64x240 Graphic LCD, plastic type-4 housing, USB PlusPower
PDK-4U03	USB - 2x20 VFD, 9mm, USB, plastic type-4 housing
PDK-4U05	USB - 2x20 VFD, 5mm, USB, plastic type-4 housing
PDK-4UP3	USB - 2x20 VFD, 9mm, IEE Protocol, USB POWERED No-Brick Reqd, plastic type-4 housing
PDK-4UP5	USB - 2x20 VFD, 5mm, IEE Protocol, USB POWERED No-Brick Reqd, plastic type-4 housing
PDK-UP03	USB - 2x20 VFD, 9mm, IEE Protocol, USB POWERED No-Brick Reqd, extruded aluminum housing
PDK-8U03	USB - Double-sided, 2x20 VFD, 9mm, IEE Protocol, USB PlusPower, compact molded plastic housing
PDK-UP05	USB - 2x20 VFD, 5mm, IEE Protocol, USB POWERED No-Brick Reqd, extruded aluminum housing
PDK–USB2	USB - 2x20 VFD, 11mm, extruded aluminum housing
PDK-USB3	USB - 2x20 VFD, 9mm, extruded aluminum housing
PDK-USB5	USB - 2x20 VFD, 5mm, extruded aluminum housing

TFT Display Enhancement

Complete integrated solutions are available which can include virtually any combination of flat panel display, interface controller, touch screen, backlight, inverter, power supply and mechanical packaging for rugged or military applications.

IEE Advantages

• Rapid Response to Customer Requests
• Competitively Priced Solutions
• In-House, Full Service Engineering
• One Year Warranty
• Harsh Environment Specialists
• Design to Customer Specifications
• ISO 9001:2000 Certified
• Short Run + High Volume Production Capability
• Quality System Qualification compliant with MIL-I-45208
• Workmanship Standards: IPC A610 and ANSI-J-Standard 001
• Harsh Environment Specialists

Display Integration Capabilities

Brightness Enhancement: Multi-Lamp Inverter Direct Backlighting Polarizer Upgrade Optical Film Enhancement (passive) Brightness up to 3000 NIT LED Backlighting (replace existing CCFL) NVIS compatibility	Filters: Anti-glare Anti-Reflective Vandal Resistant Protection EMI Contrast Enhancement
Touch Screen Integration: Resistive (Digital & Analog) Capacitive Projected capacitive NFI IR	Display Controllers: Analog RGB Video USB
Ruggedization: Extended Operating Temperature Vibration and Shock Moisture and dust Altitude Replace CCFL with LED	Mounting Bezels & Housing: Metal (machined or cast) Plastic Open frame or complete enclosures Custom enclosures to NEMA requirements available

• Agency Certifications

Vacuum Fluorescent

The unbeatable combination of outstanding appearance, ease of use, and a wide range of formats has made IEE’s VF displays the top choice in a variety of applications such as industrial, medical and test equipment.

Display fields range from 16 to 240 bright, easy to read characters. The display color is blue-green which may be filtered to several alternative colors. IEE's VF product family includes low cost and full feature dot matrix displays that are industrial strength and ruggedized. Most are available with extended operating temperatures and an array of enhanced features such as expanded character sets and downloadable fonts.

Features and Benefits

• RoHs Compliant
• On-Board serial & parallel interface
• Models with interface to Intel or Motorola host processors
• Common software Interface and connector interfaces
• Parallel 8-bit or EIA-232C serial data input at baud rates up to 19.2Kb
• Low 5Vdc power
• 100% surface mount technology
• Standard temperature range –20° to +70°C, extended range available –40° to + 85°C
• Hardware and software self-test modes
• Brightness & blinking field control
• 5 character sets
• 96 ASCII Characters; 51 Scientific and Special Characters
• European, Katakana, Cyrillic, Hebrew
• 10 user defined downloadable characters

Available Configurations

Below is a list of IEE’s most popular selling modules in the Century and No-Frills product lines. All Century 036X3 are RoHs compliant. Wide temperature range and conformal coating options are available as well as other module sizes and features, please contact factory.

Model	Character Format	Display Format	Character Height	Length	Width	Depth	Max. Current
Century Series
036X3-100-05420	5x7 DM	4x20	5 mm	5.00"	2.78"	0.92"	890mA
036X3-105-05220	5x7 DM	2x20	5 mm	5.00"	2.25"	0.88"	510mA
036X3-122-09220	5x7 DM	2x20	9 mm	7.75"	2.58"	1.00"	675mA
036X3-124-09420	5x7 DM	4x20	9 mm	7.75"	3.40"	1.00"	1300mA
036X3-151-05240	5x7 DM*	2x40	5 mm	9.50"	2.05"	1.00"	800mA
Low-Cost, “No-Frills” Series
03601-90-080R	5x7 DM	4x20	5 mm	5.51"	2.44"	1.21"	450mA
03601-91A-40R	5x7 DM	2x20	5 mm	6.93"	1.73"	1.00"	570mA
03601-92-020R	5x7 DM	1x20	5 mm	5.90"	1.50"	0.80"	410mA
03601-95B-040	5x7 DM	2x20	5 mm	5.00"	2.25"	0.94"	460mA
03601-96-080R	5x7 DM	2x24	5 mm	7.85"	2.03"	0.94"	750mA*Underbar; DM=dot matri